With injection molding process case, single stage RO system, 1 pump, portable TDS test pen and on-line resistivity monitor, Smart-S series ultrapure water system is sub- economic choice of ultrapure water for high grade experiments.
With tap water inlet, its output ranges from 15 to 30 liters/hour. It can produce single stage RO water and ultrapure water. The single stage RO water’s ion rejection rate is more than 96%, and the ultrapure water’s resistivity absolutely reaches to 18.2MΩ.cm. It completely meets the highest grade I standard of ASTM, CAP, CLSI, EP and USP.
|Model||Standard||Eliminating endotoxin||Low TOC||Synthesizing|
|Output(25℃)*||15series-15 liters/hour, 30 series-30 liters/hour|
|Flow rate||Up to 2 liters/minute (with pressure tank)|
|Pure water outlet||2: reverse osmosis water, ultrapure water|
|Ultrapure water quality|
|RO water quality|
|Ion rejection rate||96%-99% (new RO membrane)|
|Organic rejection rate||>99%, when MW>200 Dalton|
|Particles and bacteria rejection rate||>99%|
|Feed water requirements||Tap water, temperature:5-45℃,pressure:1.0-4.0Kgf/cm2|
|Dimension and weight||Length×Width×Height:410×220×420mm / Weight: about 18Kg|
|Electrical requirements||AC110-240V, 50/60Hz|
|Standard configuration||Main body (Including 1 set of cartridge)+15 liters pressure tank+ TDS/conductivity test pen|
*The value will be influenced by temperature and feed water’s quality.