描述
With injection molding process case, single stage RO system, 1 pump, portable TDS test pen and on-line resistivity monitor, Smart-Q series deionized water system is sub-economic choice of deionized water for general grade experiments.
With tap water inlet, its output ranges from 15 to 30 liters/hour. It can produce single stage RO water and deionized water. The single stage RO water’s ion rejection rate is more than 96%, and the deionized water’s resistivity is more than 15MΩ.cm, near to18.2MΩ.cm. It completely meets the requirements of general chemical or biological experiments for pure water.

Smart-Q Flow Schematic
Technology Parameter:
Model | Smart-Q15 | Smart-Q15UT | Smart-Q30 | Smart-Q30UT |
Output(25℃)* | 15 liters/hour | 30 liters/hour | ||
Flow rate | Up to 2 liters/minute (with pressure tank) | |||
Pure water outlet | 2: reverse osmosis water, deionized water | |||
Deionized water quality | ||||
Resistivity | 15-18.2MΩ.cm | |||
Bacteria | N/A | <0.1cfu/ml | N/A | <0.1cfu/ml |
Particle(>0.1μm) | N/A | <1/ml | N/A | <1/ml |
RO water quality | ||||
Ion rejection rate | 96%-99% (new RO membrane) | |||
Organic rejection rate | >99%, when MW>200 Dalton | |||
Particles and bacteria rejection rate | >99% | |||
Feed water requirements | Tap water, temperature:5-45℃,pressure:1.0-4.0Kgf/cm2 | |||
Dimension and weight | Length×Width×Height:410×220×420mm / Weight: about 18Kg | |||
Electrical requirements | AC110-240V, 50/60Hz | |||
Power | 72W | |||
Standard configuration | Main body (Including 1 set of cartridge)+15 liters pressure tank+ TDS/conductivity test pen |
Remarks:
*The value will be influenced by temperature and feed water’s quality.
评价
目前还没有评价