描述
With injection molding process case, 1 pump, portable TDS test pen and on-line resistivity monitor, Smart-D series ultrapure water system is sub-economic choice of ultrapure water for high grade experiments.
With pure water or distilled water inlet, its output is up to 2 liters/minute. It can produce deionized water and ultrapure water. The deionized water’s resistivity is above 5MΩ.cm, and the ultrapure water’s resistivity absolutely reaches to 18.2MΩ.cm. It completely meets the highest grade I standard of ASTM, CAP, CLSI, EP and USP.
Smart-D Flow Schematic
Technology Parameter:
| Model | Standard | Eliminating endotoxin | Low TOC | Synthesizing |
| Smart-D | Smart-DUF | Smart-DUV | Smart-DUVF | |
| Output | Up to 2 liters/minute (less output with UF cartridge) | |||
| Pure water outlet | 2: deionized water, ultrapure water | |||
| Ultrapure water quality | ||||
| Resistivity(25℃) | 18.2MΩ.cm | |||
| TOC* | <10ppb | <10ppb | <3ppb | <3ppb |
| Bacteria | <0.1cfu/ml | |||
| Particle(>0.1μm) | <1/ml | |||
| Endotoxin | N/A | ＜0.001Eu/ml | N/A | ＜0.001Eu/ml |
| RNases | N/A | <0.01ng/ml | N/A | <0.01ng/ml |
| DNases | N/A | <4pg/μl | N/A | <4pg/μl |
| Deionized water quality | ||||
| Resistivity(25℃) | >5MΩ.cm | |||
| Feed water requirements | RO water, distilled water, deionized water, 5-45℃,1atm* | |||
| Dimension and weight | Length×Width×Height:410×220×420mm / Weight: about 16Kg | |||
| Electrical requirements | AC110-240V, 50/60Hz | |||
| Power | 72W | |||
| Standard configuration | Main body (Including 1 set of cartridge)+ TDS/conductivity test pen | |||
Remarks:
*The value will be influenced by temperature and feed water’s quality.
评价
目前还没有评价